Skip to main content
Log in
Omron E2EX2B1TL85MOMS — Proximity Sensors

Omron E2EX2B1TL85MOMS Inductive Sensor, M8, 2mm, PNP NO, 5m

MPNE2EX2B1TL85MOMS

Omron E2E-Next, inductive proximity sensor, M8 flush mount, PNP NO, 2 mm, 1.5 kHz, 10–30 V DC, 5 m cable, IP67/IP69K.

$106.34 – $120.55Ref. price · indicative, final on quote
Omron E2EX2B1TL85MOMS datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

E2EX2B1TL85MOMS — Identification
ParameterValue
SeriesE2E-Next
E2EX2B1TL85MOMS — Sensing
ParameterValue
Sensing distance, max.2 mm
E2EX2B1TL85MOMS — Electrical
ParameterValue
Operating voltage, max.30 V
Operating voltage, min.10 V
Termination typeCable, 5 m
E2EX2B1TL85MOMS — Output
ParameterValue
Switching frequency1.5 kHz
Load current200 mA
E2EX2B1TL85MOMS — Mechanical
ParameterValue
Mounting typeFlush Mount
Length47.8 mm
Housing materialStainless Steel
E2EX2B1TL85MOMS — Environmental
ParameterValue
Operating temperature, max.85 °C
Operating temperature, min.-40 °C
IP protection ratingIP67;IP67G;IP69K
E2EX2B1TL85MOMS — Other specifications
ParameterValue
Construction formM8
Current consumption16 mA
Inductive sensor output typePNP, NO

Product details

M8 flush-mount with 5m cable

The E2EX2B1TL85MOMS: Omron E2E-Next M8 inductive proximity sensor, flush-mounted, with PNP normally-open output. Senses at 2 mm with a 1.5 kHz switching frequency. Stainless steel housing handles washdown zones—IP67/IP67G/IP69K seals keep out high-pressure sprays. Cable is 5 m, pre-attached; no connector body on the sensor.

Flush mount means the face can be level with the mounting surface—no dead zone beyond the stated 2 mm. Works from 10 to 30 V DC, draws 16 mA, switches loads up to 200 mA. Temperature range covers -40 to 85 °C, so it can sit in a freezer line or near a pasteurizer. IP67G adds oil resistance to the standard IP67 seal; IP69K is the high-pressure hot-water washdown rating common in food and pharmaceutical clean-in-place cycles.

Frequently asked questions

Will this drop into a panel specified around the M8 connector variant E2EX2B1TL8M3OMS?

No. This sensor has a 5m cable, not an M8 connector. You would need to terminate the cable ends, which changes the wiring compared to plugging in a cordset.

What is the sensing distance and switching frequency?

2 mm at 1.5 kHz. Suitable for high-speed detection of small metal targets at close range.

What IP rating does it carry?

IP67, IP67G (oil-resistant), and IP69K (high-pressure washdown).

MPN
E2EX2B1TL85MOMS