The Omron E2EX2B1TL8M1OMS is an M8 flush-mount inductive sensor from the E2E-Next series, detecting ferrous targets at 2 mm with PNP normally open output. Its stainless steel housing and IP67/IP69K ratings hold up to coolant splash and washdown cycles on machine tools and packaging lines. Switching at 1.5 kHz keeps up with fast-cycling pick-and-place or spindle-speed presence checks; the 10–30 V supply and 16 mA current consumption are typical for a 200 mA load-rated sensor. At 53 mm length, the barrel fits standard M8 clamp mounts, and the M12 4-pin connector matches common industrial breakouts. Operating range from –40 to 85 °C covers both freezer environments and hot machine zones without derating.
vs E2BS08KS02MCB120OMS (E2B series)
The closest functional cross-shop candidate is the Omron E2BS08KS02MCB120OMS, also M8 flush, 2 mm sensing, PNP NO, and 1.5 kHz switching. The E2E-Next part carries two advantages: a wider temperature range (–40 to 85 °C vs –25 to 70 °C) and full IP69K washdown rating (the E2B is IP67 only). The E2E-Next uses an M12 4-pin connector, while the E2B uses an M8 3-pin. The E2E-Next body length is 53 mm; the E2B body length is 44 mm.
Mounting & Wiring
Flush-mount into steel: 2 mm sensing distance. Use M12 4-pin female connectors for IP69K retention. Cable length not bundled – specify pigtail or field-wireable connector separately. PNP NO output pulls high on detection; verify PLC sinking input compatibility. 200 mA max load handles direct relay coils or small solenoid valves within the 10–30 V supply range.