Skip to main content
Log in
Omron E2EX2B1TL8M3OMS — Proximity Sensors

Omron E2EX2B1TL8M3OMS M8 Flush Inductive Sensor, PNP NO, 2mm

MPNE2EX2B1TL8M3OMS

Omron E2E-Next series M8 flush inductive sensor, PNP NO, 2 mm sensing distance, 1.5 kHz switching frequency, stainless steel, IP67/IP69K.

$57.85Ref. price · indicative, final on quote
Omron E2EX2B1TL8M3OMS datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

E2EX2B1TL8M3OMS — Identification
ParameterValue
SeriesE2E-Next
E2EX2B1TL8M3OMS — Sensing
ParameterValue
Sensing distance, max.2 mm
E2EX2B1TL8M3OMS — Electrical
ParameterValue
Operating voltage, max.30 V
Operating voltage, min.10 V
Termination typeConnector, M8, 4-Pin
E2EX2B1TL8M3OMS — Output
ParameterValue
Switching frequency1.5 kHz
Load current200 mA
E2EX2B1TL8M3OMS — Mechanical
ParameterValue
Mounting typeFlush Mount
Length49 mm
Housing materialStainless Steel
E2EX2B1TL8M3OMS — Environmental
ParameterValue
Operating temperature, max.85 °C
Operating temperature, min.-40 °C
IP protection ratingIP67;IP69K
E2EX2B1TL8M3OMS — Other specifications
ParameterValue
Construction formM8
Current consumption16 mA
Inductive sensor output typePNP, NO

Product details

The Omron E2EX2B1TL8M3OMS is an M8 flush-mount inductive sensor from the E2E-Next series, rated for 2 mm sensing distance and 1.5 kHz switching frequency. It outputs a PNP normally-open signal on an M8 4-pin connector, drawing 16 mA from a 10–30 V supply and switching up to 200 mA load. Flush-mount sensing at 2 mm means the sensor face can be level with the mounting surface — no target protrusion needed for detection. The 1.5 kHz switching frequency handles part-counting at moderate line speeds; for faster targets verify scan rate stays under that ceiling. The stainless steel housing carries IP67 and IP69K ratings, so this sensor survives high-pressure washdown and wet environments without an extra enclosure.

Frequently asked questions

What is the operating temperature range?

Rated from -40 °C to 85 °C.

Does this sensor drop in as a replacement for the E2BS08KS02MCB120OMS?

The E2E-Next sensor mounts in the same hole and shares the same sensing distance and switching frequency, but it uses a 4-pin connector instead of the E2B's 3-pin, so the harness must be rewired or adapted. Temperature and protection ratings are higher on the E2E-Next.

MPN
E2EX2B1TL8M3OMS