Integrator note
The Omron E2EX2B285MOMS is an M8 flush-mount inductive sensor from the E2E-Next series, rated for 2 mm sensing distance and switching at 1.5 kHz, with PNP normally-closed output and 5 m cable termination. The 1.5 kHz switching frequency handles high-speed part detection, while the IP67G and IP69K ratings let it survive high-pressure washdown and oil-laden environments. Operating temperature spans -40 to 85 °C, so it fits cold storage, freezers, and applications near process heat. The stainless steel housing resists corrosion; the 5 m cable is a fixed length — no connector to swap.
Cross-check with E2BS08KS02MCB120OMS
The closest peer by form factor is the Omron E2BS08KS02MCB120OMS — same M8 flush mount, 2 mm sensing, and 1.5 kHz switching.
Mounting and wiring
Flush mount means the face can be level with the mounting surface — no dead zone for side approach. The 5 m cable is factory-attached; plan cable management if your terminal point is closer. Pair with a mating connector or splice box as needed.