Omron E2E-Next E2EX2B28M1OMS, Inductive Sensor, PNP NC, M8 Flush Mount, 2 mm, 1.5 kHz, IP67/IP69K.
| Parameter | Value |
|---|---|
| Series | E2E-Next |
| Parameter | Value |
|---|---|
| Sensing distance, max. | 2 mm |
| Parameter | Value |
|---|---|
| Operating voltage, max. | 30 V |
| Operating voltage, min. | 10 V |
| Termination type | Connector, M12, 4-Pin |
| Parameter | Value |
|---|---|
| Switching frequency | 1.5 kHz |
| Load current | 200 mA |
| Parameter | Value |
|---|---|
| Mounting type | Flush Mount |
| Length | 43 mm |
| Housing material | Stainless Steel |
| Parameter | Value |
|---|---|
| Operating temperature, max. | 85 °C |
| Operating temperature, min. | -40 °C |
| IP protection rating | IP67;IP69K |
| Parameter | Value |
|---|---|
| Construction form | M8 |
| Current consumption | 16 mA |
| Inductive sensor output type | PNP, NC |
The E2EX2B28M1OMS: M8 flush-mount proximity sensor from the E2E-Next series, PNP normally-closed output. Rated 1.5 kHz switching frequency suits high-speed counting or cam detection. Designed for environments needing both IP67 and IP69K washdown resistance; stainless steel housing handles caustic cleaning agents. M12 connector simplifies field replacement without opening the panel.
The sensor body length is 43 mm.
It is part of the Omron E2E-Next series.
No. The output logic differs (PNP NC vs PNP NO) and the connector is M12 4-pin versus M8 3-pin. A cable adapter or rewiring is required.
No related articles