The Omron E2EX2B28M3OMS is an M8 flush-mount inductive sensor from the E2E-Next series, switching at 1.5 kHz with a 2 mm sensing distance. Output is PNP normally closed (NC) over 10-30 VDC, handling up to 200 mA load. The stainless steel housing (M8) carries IP67 and IP69K protection; temperature range spans -40 to 85 °C.
Swap considerations vs E2BS08KS02MCB120OMS
The E2BS08KS02MCB120OMS (E2B series) shares the same M8 flush stainless form and 2 mm sensing distance at 1.5 kHz, but its output is PNP normally open (NO) via a 3-pin M8 connector, and its operating temperature is restricted to -25 to 70 °C. The E2EX2B28M3OMS uses a 4-pin M8 connector (NC output), so a direct cable swap requires verifying the pin assignment. The wider temperature range and IP69K may be necessary in washdown zones.
Integration notes
Flush-mount rated for metal panels – install flush to the mounting surface. M8 connector mates with standard 4-pin female cordset. PNP NC output means the sensor turns off its load when the target is present. Power supply: 10-30 VDC, 16 mA unloaded. Switching frequency of 1.5 kHz supports high-speed counting; verify load inductance for snubbing.