Skip to main content
Log in
Omron E2EX2B2L82MOMS — Proximity Sensors

Omron E2EX2B2L82MOMS Inductive Sensor PNP NC 2mm 2m Cable

MPNE2EX2B2L82MOMS

Omron E2E-Next, E2EX2B2L82MOMS, M8 flush-mount inductive sensor, PNP NC, 2 mm sensing range, 1.5 kHz switching frequency, 2 m cable, stainless steel, IP67/IP67G/IP69K.

Omron E2EX2B2L82MOMS datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

E2EX2B2L82MOMS — Identification
ParameterValue
SeriesE2E-Next
E2EX2B2L82MOMS — Sensing
ParameterValue
Sensing distance, max.2 mm
E2EX2B2L82MOMS — Electrical
ParameterValue
Operating voltage, max.30 V
Operating voltage, min.10 V
Termination typeCable, 2 m
E2EX2B2L82MOMS — Output
ParameterValue
Switching frequency1.5 kHz
Load current200 mA
E2EX2B2L82MOMS — Mechanical
ParameterValue
Mounting typeFlush Mount
Length47.8 mm
Housing materialStainless Steel
E2EX2B2L82MOMS — Environmental
ParameterValue
Operating temperature, max.85 °C
Operating temperature, min.-40 °C
IP protection ratingIP67;IP67G;IP69K
E2EX2B2L82MOMS — Other specifications
ParameterValue
Construction formM8
Current consumption16 mA
Inductive sensor output typePNP, NC

Product details

The Omron E2EX2B2L82MOMS is an M8 flush-mount inductive sensor from the E2E-Next series. It detects ferrous targets up to 2 mm away and switches at 1.5 kHz. The PNP normally-closed output means the load is powered when no target is present — a common choice for safety interlocks or fail-safe monitoring on machine doors. Stainless steel housing shrugs off cutting fluids and washdown, and the IP69K rating handles high-pressure cleaning cycles without leakage. Powered from 10–30 VDC, draw is 16 mA, and the switching load can sink up to 200 mA.

Cabled vs. Connector — Peer Options

The sibling E2EX2B2L8M5OMS carries the same M8 flush mount, 2 mm range, and 1.5 kHz speed but uses an M8 connector instead of a 2 m cable. The 49 mm sensor body adds a molded base, keeping the mounting hole pattern identical but requiring a mating cordset.

Frequently asked questions

What is the closest functional second-source — E2EX2B2L8M5OMS?

E2EX2B2L8M5OMS is the same sensor with an M8 connector instead of a 2 m cable. All sensing specs match: 2 mm range, 1.5 kHz, PNP NC, flush mount. The swap is electrically identical but requires a mating cordset for the connector version.

Will E2EX2B2L82MOMS drop into a panel wired for E2EX2B2L8M5OMS without rewiring?

No direct drop-in: the cable version needs to be wired into the terminal block; the connector version plugs into a pre-wired cordset. The sensor body dimensions are nearly identical (47.8 mm vs 49 mm), so the mounting hole fits, but the termination method requires a wiring change.

MPN
E2EX2B2L82MOMS