The Omron E2EX2C182MOMS is an M8 flush-mount inductive sensor with NPN normally-open output from the E2E-Next series. It switches at 1.5 kHz, senses ferrous targets at 2 mm, and runs on 10 to 30 VDC. The load current rating is 200 mA. That's the whole electrical picture — no fieldbus, no IO-Link, just a three-wire DC proximity switch.
The part arrives as a single sensor with 2 m of attached PVC cable, terminated bare-ended. No mounting bracket or nut is included — the M8 flush barrel is designed for a standard through-hole mount with an M8 locknut (sourced separately if not already on hand). The cable is rated for continuous flex? No, it's a standard static installation cable; use cable glands to avoid tension. IP67G and IP69K ratings require proper O-ring sealing at the mounting face; verify the panel surface is flat and clean before tightening.
Sourcing note
Quoted to order against a BOM line. No minimum order quantity beyond the first piece.