Skip to main content
Log in
Omron E2EX4B1TL12M1OMS — Proximity Sensors

Omron E2EX4B1TL12M1OMS Inductive Sensor, PNP NO, 4 mm, IP67/

MPNE2EX4B1TL12M1OMS

Omron E2E-Next inductive sensor, E2EX4B1TL12M1OMS, M12 flush mount, PNP NO output, 4 mm sensing distance, 1 kHz switching, IP67/IP69K, M12 4-pin connector.

$60.97Ref. price · indicative, final on quote
Omron E2EX4B1TL12M1OMS datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

E2EX4B1TL12M1OMS — Identification
ParameterValue
SeriesE2E-Next
E2EX4B1TL12M1OMS — Sensing
ParameterValue
Sensing distance, max.4 mm
E2EX4B1TL12M1OMS — Electrical
ParameterValue
Operating voltage, max.30 V
Operating voltage, min.10 V
Termination typeConnector, M12, 4-Pin
E2EX4B1TL12M1OMS — Output
ParameterValue
Switching frequency1 kHz
Load current200 mA
E2EX4B1TL12M1OMS — Mechanical
ParameterValue
Mounting typeFlush Mount
Length70 mm
Housing materialBrass Nickel Plated
E2EX4B1TL12M1OMS — Environmental
ParameterValue
Operating temperature, max.85 °C
Operating temperature, min.-40 °C
IP protection ratingIP67;IP69K
E2EX4B1TL12M1OMS — Other specifications
ParameterValue
Construction formM12
Current consumption16 mA
Inductive sensor output typePNP, NO

Product details

The E2EX4B1TL12M1OMS: M12 flush-mount inductive sensor from the E2E-Next series, built for tight mounting and wet environments. Senses ferrous targets at 4 mm, switches at 1 kHz with a PNP normally-open output — direct fit to most PLC sink inputs. Rated IP67/IP69K, so it shrugs off high-pressure washdown spray common in food and beverage lines. Operates over a -40 to 85 °C span, supply 10–30 V, draws 16 mA plus the load (200 mA max). Housing is brass nickel-plated with an M12 4-pin connector; length is 70 mm.

Frequently asked questions

When sourcing E2EX4B1TL12M1OMS, what's the closest functional second-source — E2AM12KS04M1B14OMS?

The E2AM12KS04M1B14OMS is a functional alternative with the same M12 flush-mount, PNP NO output, 4 mm sensing distance, and M12 4-pin connector, but it is 48 mm long (vs 70 mm), lacks nickel plating and IP69K, and has a narrower temperature range. It works as a drop-in for wiring but verify physical fit.

What is E2EX4B1TL12M1OMS's listed length (70 mm) on this component line?

The sensor body length is 70 mm, measured from the sensing face to the end of the threaded barrel.

What is E2EX4B1TL12M1OMS's listed series (E2E-Next) on this component line?

It belongs to the E2E-Next series, the successor to the E2E Classic line.

MPN
E2EX4B1TL12M1OMS