Washdown-Ready M12 Sensor
The E2EX4B2125MOMS: M12 flush-mount inductive sensor with PNP normally-closed output. 4 mm sensing distance at 10–30 VDC. Brass nickel-plated housing and IP67/IP67G/IP69K ratings mean it survives high-pressure washdown and temporary submersion. Switching frequency 1 kHz, current consumption 16 mA, load current 200 mA.
Compared to E2AM12KS04M1B14OMS
The E2AM12KS04M1B14OMS uses the same 4 mm sensing distance and flush mount but switches normally-open and comes with an M12 connector instead of a 5 m cable. The E2E-Next also extends the temperature range to 85 °C versus 70 °C.
Mounting & Wiring Note
Flush-mount into a steel target. Tighten the M12 nut to 10 Nm. Cable is 5 m, three wires: brown +V, blue 0V, black output (PNP NC). If driving a relay coil, add a freewheeling diode across the load.
