Sensor fit – flush mount, 4 mm range, PNP NO/NC
The E2EX4B3DL122MOMS: Flush mount in metal – 4 mm nominal sensing distance – PNP output configurable as normally open or normally closed via the programming line. Switching frequency 1 kHz covers most discrete proximity applications. Load current 100 mA, sensor supply draw 20 mA on a 10–30 VDC bus. Brass nickel-plated housing, M12 thread, 2 m cable termination, overall length 69.1 mm. IP67, IP67G, IP69K – rated for high-pressure washdown environments like food processing or automotive paint lines. Temperature range -40 °C to 85 °C.
Cable vs connector – not a direct swap with E2AM12KS04M1B14OMS
The closest functional sibling is the E2AM12KS04M1B14OMS (E2A series, flush mount, 4 mm, M12, PNP NO only). That sensor uses a M12 connector; this E2E part has a fixed 2 m cable. Sensor body length differs: 48 mm (E2A) vs 69.1 mm (E2E). The E2A outputs NO only; the E2E is programmable NO/NC. If a panel was wired for the E2A, dropping in the E2E requires re-terminating the field wiring into the cable and possibly adjusting mounting depth. It is not a pin-to-pin swap without rewiring.