The Omron E2EX4MB1T82MOMS is a current-production M8 inductive proximity sensor from the E2E-Next series, with a PNP normally-open output and a 4 mm sensing distance. It's a non-flush mount sensor in a stainless steel barrel, terminated with a 2 m cable. The protection rating covers IP67, IP67G, and IP69K, so it's built for high-pressure, high-temperature washdown environments where painted sensors would give up. Operating range spans -40 to 85 °C, which means it survives both freezing lift stations and the steam cycle of a hot-water cleanout. Switching frequency is 1 kHz, adequate for counting bottles or monitoring valve position at moderate line speeds.
Omron E2EX4MB1T82MOMS E2E-Next 4mm PNP NO, IP69K
MPNE2EX4MB1T82MOMS
Omron E2E-Next inductive sensor, M8 non-flush, PNP NO, 4 mm sensing, stainless steel, 2 m cable, IP67/IP67G/IP69K.
$60.97Ref. price · indicative, final on quote
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsListing updated Jun 2026
Specifications
Identification
| Parameter | Value |
|---|---|
| Series | E2E-Next |
Sensing
| Parameter | Value |
|---|---|
| Sensing distance, max. | 4 mm |
Electrical
| Parameter | Value |
|---|---|
| Operating voltage, max. | 30 V |
| Operating voltage, min. | 10 V |
| Termination type | Cable, 2 m |
Output
| Parameter | Value |
|---|---|
| Switching frequency | 1 kHz |
| Load current | 200 mA |
Mechanical
| Parameter | Value |
|---|---|
| Mounting type | Non Flush Mount |
| Length | 37.8 mm |
| Housing material | Stainless Steel |
Environmental
| Parameter | Value |
|---|---|
| Operating temperature, max. | 85 °C |
| Operating temperature, min. | -40 °C |
| IP protection rating | IP67;IP67G;IP69K |
Other specifications
| Parameter | Value |
|---|---|
| Construction form | M8 |
| Current consumption | 16 mA |
| Inductive sensor output type | PNP, NO |
Product details
Frequently asked questions
What is the sensing distance and mounting type?
It has a 4 mm sensing distance and requires non-flush mounting, meaning the sensor face must have free space around it (not embedded in metal).
Can I replace the E2BS08KS02MCB120OMS with this sensor?
Not without checking the installation. The E2BS is flush-mount (2 mm) with a connector and lower IP/temperature rating. The E2EX4MB1T82MOMS is non-flush, has a cable, and is rated for IP69K and higher temperatures. If the original was flush-mounted in metal, the non-flush version will not work in that same pocket.
What is the length of the sensor?
The sensor body is 37.8 mm long.
What series is this sensor?
It belongs to the Omron E2E-Next series.
MPN
E2EX4MB1T82MOMS