Omron E2E-Next inductive sensor, M8 non-flush, PNP normally open, 4 mm sensing distance, 1 kHz switching frequency, M12 4-pin connector, IP67/IP69K, stainless steel housing.
| Parameter | Value |
|---|---|
| Series | E2E-Next |
| Parameter | Value |
|---|---|
| Sensing distance, max. | 4 mm |
| Parameter | Value |
|---|---|
| Operating voltage, max. | 30 V |
| Operating voltage, min. | 10 V |
| Termination type | Connector, M12, 4-Pin |
| Parameter | Value |
|---|---|
| Switching frequency | 1 kHz |
| Load current | 200 mA |
| Parameter | Value |
|---|---|
| Mounting type | Non Flush Mount |
| Length | 43 mm |
| Housing material | Stainless Steel |
| Parameter | Value |
|---|---|
| Operating temperature, max. | 85 °C |
| Operating temperature, min. | -40 °C |
| IP protection rating | IP67;IP69K |
| Parameter | Value |
|---|---|
| Construction form | M8 |
| Current consumption | 16 mA |
| Inductive sensor output type | PNP, NO |
The Omron E2EX4MB1T8M1OMS is an M8 non-flush inductive proximity sensor from the E2E-Next series, delivering a 4 mm sensing distance with a PNP normally open output, switching at 1 kHz. Rated for 10 to 30 VDC supply, it draws 16 mA and can switch loads up to 200 mA. The stainless steel housing and IP67 / IP69K rating make it suitable for washdown zones in food, beverage, and pharmaceutical lines without needing a separate sensor shield.
The E2EX4MB1T8M3OMS is the nearest functional match: same sensing distance, output type, voltage, stainless housing, and IP69K rating, but it uses an M8 connector instead of M12 and is 39 mm long. They are not direct drop-in replacements due to the connector difference.
The sensor body is 43 mm long.
It is part of the Omron E2E-Next series.
No related articles