Skip to main content
Log in
Omron E2EX4MB1T8M3OMS — Proximity Sensors

Omron E2EX4MB1T8M3OMS Inductive Sensor, 4mm, 1kHz, M8 4-pin

MPNE2EX4MB1T8M3OMS

Omron E2E-Next series inductive sensor, E2EX4MB1T8M3OMS, PNP NO, 1 kHz switching, 4 mm sensing distance, M8 4-pin connector, stainless steel, IP67/IP69K, non-flush mount.

$60.97Ref. price · indicative, final on quote
Omron E2EX4MB1T8M3OMS datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

E2EX4MB1T8M3OMS — Identification
ParameterValue
SeriesE2E-Next
E2EX4MB1T8M3OMS — Sensing
ParameterValue
Sensing distance, max.4 mm
E2EX4MB1T8M3OMS — Electrical
ParameterValue
Operating voltage, max.30 V
Operating voltage, min.10 V
Termination typeConnector, M8, 4-Pin
E2EX4MB1T8M3OMS — Output
ParameterValue
Switching frequency1 kHz
Load current200 mA
E2EX4MB1T8M3OMS — Mechanical
ParameterValue
Mounting typeNon Flush Mount
Length39 mm
Housing materialStainless Steel
E2EX4MB1T8M3OMS — Environmental
ParameterValue
Operating temperature, max.85 °C
Operating temperature, min.-40 °C
IP protection ratingIP67;IP69K
E2EX4MB1T8M3OMS — Other specifications
ParameterValue
Construction formM8
Current consumption16 mA
Inductive sensor output typePNP, NO

Product details

Sensor selection note – non-flush mount in stainless steel

The E2EX4MB1T8M3OMS: This is the non-flush version of the E2E-Next, rated for 4 mm sensing distance. The target must approach from the face, not the side – no metal around the active zone. Stainless steel housing and IP67/IP69K cover washdown environments. Output is PNP normally-open, switching at 1 kHz. Supply range 10–30 V, current consumption 16 mA; load capacity 200 mA. Operating temperature -40 to 85 °C.

Mounting and wiring considerations

The M8 4-pin connector mates to standard M8 cordsets. Body length is 39 mm.

Frequently asked questions

What is the sensing distance and mounting type?

Sensing distance is 4 mm, and it requires non-flush mounting – no metal around the sensing face.

What is the length of the sensor?

The sensor body measures 39 mm.

Will this sensor drop into a panel wired for the E2BS08KS02MCB120OMS?

Not without changes. The E2B is flush-mount with a 3‑pin connector; this sensor is non-flush and 4‑pin. The wiring and physical clearance requirements differ.

MPN
E2EX4MB1T8M3OMS