Omron E2EX6B1T122MOMS is an M12 inductive proximity sensor from the E2E family, with a quasi-flush mounting face that allows it to be embedded in metal without the sensing range penalty of a fully flush design. It detects ferrous targets up to 6 mm away, switching at 800 Hz with a PNP normally open output. The pre-wired cable simplifies installation and eliminates connector procurement, but also means a longer replacement time if the wire is damaged.
Omron E2EX6B1T122MOMS Inductive Sensor, PNP NO 6mm
MPNE2EX6B1T122MOMS
Omron E2E series inductive proximity sensor, PNP normally open, 6 mm sensing distance, 800 Hz switching frequency, pre-wired cable, IP67.
$67.39Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026
Specifications
| Parameter | Value |
|---|---|
| Series | E2E |
| Parameter | Value |
|---|---|
| Sensing distance, max. | 6 mm |
| Parameter | Value |
|---|---|
| Operating voltage, max. | 30 V |
| Operating voltage, min. | 10 V |
| Termination type | Pre-Wired |
| Parameter | Value |
|---|---|
| Switching frequency | 800 Hz |
| Load current | 100 mA |
| Parameter | Value |
|---|---|
| Mounting type | Quasi Flush Mount |
| Length | 47 mm |
| Housing material | Brass Nickel Plated |
| Parameter | Value |
|---|---|
| Operating temperature, max. | 70 °C |
| Operating temperature, min. | -25 °C |
| IP protection rating | IP67 |
| Parameter | Value |
|---|---|
| Construction form | M12 |
| Current consumption | 16 mA |
| Inductive sensor output type | PNP, Make Contact (NO) |
Product details
Frequently asked questions
What is the listed length of E2EX6B1T122MOMS?
The body length is 47 mm, excluding the pre-wired cable.
Will E2EX6B1T122MOMS drop into a panel that was specified around E2AM12KS04M1B14OMS without rewiring?
No. The E2AM12KS04M1B14OMS uses an M12 connector and requires a mating cordset; the E2EX6B1T122MOMS has a pre-wired cable. The mounting hole is M12 and the quasi-flush design allows it to be installed, but you would need to run the cable to the PLC rather than plug into an existing connector. The sensing distance is also different (6 mm vs 4 mm).
MPN
E2EX6B1T122MOMS