Inductive sensor, M18, flush mount, 8mm sensing distance, 500 Hz switching, NO/NC, 10-30 V, 20 mA consumption, 100 mA load, 2 m cable, IP67/IP67G/IP69K, nickel-plated brass.
| Parameter | Value |
|---|---|
| Series | E2E-X |
| Parameter | Value |
|---|---|
| Sensing distance, max. | 8 mm |
| Parameter | Value |
|---|---|
| Operating voltage, max. | 30 V |
| Operating voltage, min. | 10 V |
| Termination type | Cable, 2 m |
| Parameter | Value |
|---|---|
| Switching frequency | 500 Hz |
| Load current | 100 mA |
| Parameter | Value |
|---|---|
| Mounting type | Flush Mount |
| Length | 55 mm |
| Housing material | Nickel Plated Brass |
| Parameter | Value |
|---|---|
| Operating temperature, max. | 85 °C |
| Operating temperature, min. | -40 °C |
| IP protection rating | IP67;IP67G;IP69K |
The E2EX8B3D182MOMS: M18 flush-mount inductive sensor. Hits 8 mm on steel at 500 Hz. NO and NC outputs wired in one unit — pick either. 10-30 V supply, draws 20 mA, switches up to 100 mA. 2 m cable, IP67/G and IP69K rated. Nickel-plated brass body, runs from -40 to 85 °C.
Flush mount in steel. 8 mm range derates on non-ferrous targets — check the target material. With IP69K, stands up to hot-pressure washdowns common in food and beverage lines.
29 mm, matching the M18 barrel diameter.
No. The M18 barrel needs a 29 mm hole vs the 17 mm hole for the M12 peer. Termination also differs — cable vs M12 connector. Expect to rework the mounting and wiring.
No related articles