BOM / RFQ

Omron E2EX8B3D185MOMS — Proximity Sensors

Omron E2EX8B3D185MOMS Inductive Sensor, M18, 8mm, 500Hz

MPNE2EX8B3D185MOMS

Omron E2E-Next series, M18 flush inductive sensor, PNP NO/NC, 8 mm sensing distance, 500 Hz switching, 10-30 V, 5 m cable, IP69K.

$54.93Ref. price · indicative, final on quote

Add to RFQ

Omron E2EX8B3D185MOMS datasheet (PDF)

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

E2EX8B3D185MOMS — Identification
Parameter	Value
Series	E2E-Next

E2EX8B3D185MOMS — Sensing
Parameter	Value
Sensing distance, max.	8 mm

E2EX8B3D185MOMS — Electrical
Parameter	Value
Operating voltage, max.	30 V
Operating voltage, min.	10 V
Termination type	Cable, 5 m

E2EX8B3D185MOMS — Output
Parameter	Value
Switching frequency	500 Hz
Load current	100 mA

E2EX8B3D185MOMS — Mechanical
Parameter	Value
Mounting type	Flush Mount
Length	55.3 mm
Housing material	Brass Nickel Plated

E2EX8B3D185MOMS — Environmental
Parameter	Value
Operating temperature, max.	85 °C
Operating temperature, min.	-40 °C
IP protection rating	IP67;IP67G;IP69K

E2EX8B3D185MOMS — Other specifications
Parameter	Value
Construction form	M18
Current consumption	20 mA
Inductive sensor output type	PNP;NO/NC

Product details

M18 flush sensor with 8 mm range and 500 Hz switching

The Omron E2EX8B3D185MOMS is an M18 flush-mount inductive sensor from the E2E-Next series, rated for 8 mm sensing at 500 Hz switching frequency with PNP NO/NC output. Operating range is 10–30 V, current consumption 20 mA, and the load current max is 100 mA. Protection rating covers IP67, IP67G, and IP69K, suited for washdown and high-pressure cleaning.

Mounting and cable routing

Flush mount; no derating needed for the 8 mm sensing range. Cable is 5 m, exits axially. Housing is brass nickel-plated.

Frequently asked questions

Can the E2EX8B3D185MOMS replace an E2AM12KS04M1B14OMS without rewiring?

No. The E2AM12KS04M1B14OMS is M12 with an M12 connector; the E2EX8B3D185MOMS is M18 with a 5 m cable. The mounting hole diameter differs (M12 vs M18), and the cable would need to be spliced or routed, so a full mechanical and electrical rework is required.