Skip to main content
Log in
Omron E2EX8B3DL18M1OMS — Proximity Sensors

Omron E2EX8B3DL18M1OMS E2E-Next Inductive Sensor, 8 mm, Flus

MPNE2EX8B3DL18M1OMS

Omron E2E-Next inductive sensor, M18 flush mount, PNP NO/NC, 8 mm sensing distance, 500 Hz, 100 mA load, IP67/IP69K, -40 to 85°C, M12 4-pin connector.

$60.97Ref. price · indicative, final on quote
Omron E2EX8B3DL18M1OMS datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

E2EX8B3DL18M1OMS — Identification
ParameterValue
SeriesE2E-Next
E2EX8B3DL18M1OMS — Sensing
ParameterValue
Sensing distance, max.8 mm
E2EX8B3DL18M1OMS — Electrical
ParameterValue
Operating voltage, max.30 V
Operating voltage, min.10 V
Termination typeConnector, M12, 4-Pin
E2EX8B3DL18M1OMS — Output
ParameterValue
Switching frequency500 Hz
Load current100 mA
E2EX8B3DL18M1OMS — Mechanical
ParameterValue
Mounting typeFlush Mount
Length75 mm
Housing materialBrass Nickel Plated
E2EX8B3DL18M1OMS — Environmental
ParameterValue
Operating temperature, max.85 °C
Operating temperature, min.-40 °C
IP protection ratingIP67;IP69K
E2EX8B3DL18M1OMS — Other specifications
ParameterValue
Construction formM18
Current consumption20 mA
Inductive sensor output typePNP;NO/NC

Product details

E2EX8B3DL18M1OMS is an M18 flush-mount inductive sensor from Omron's E2E-Next series. Sensing distance is 8 mm on ferrous targets, with a PNP output that can be wired NO or NC via a single part number. Switching frequency of 500 Hz covers typical discrete-part detection on packaging or material-handling lines. Rated for 100 mA load current, it drives most PLC inputs directly. The brass nickel-plated housing carries IP67 and IP69K ratings, so it stands up to high-pressure washdown in food zones.

Frequently asked questions

What is the sensing distance and output type?

8 mm flush sensing distance on ferrous metals; PNP output that can be wired normally open or normally closed.

Will it drop into a panel originally wired for E2AM12KS04M1B14OMS?

No — the E2EX8B3DL18M1OMS has an M18 body (75 mm length) versus the M12 body (48 mm) of the E2A. Mounting holes and sensing gap will change. Rewiring is also needed because the E2A is NO-only, while this sensor supports programmable NO/NC.

MPN
E2EX8B3DL18M1OMS