The Omron E2EX8MB1T12M1OMS is an M12 inductive sensor from the E2E-Next series — PNP normally open, 8 mm sensing distance, non-flush mount. It switches at 800 Hz and handles a 200 mA continuous load, drawing 16 mA from a 10–30 VDC supply. The brass nickel-plated barrel and IP67/IP69K rating mean it holds up under high-pressure washdown, so it's a natural fit for hygienic lines or wet environments where caustic CIP cycles are routine.
The sibling E2EX8MB1TL12M1OMS shares the same electrical specs — same 8 mm sensing distance, same PNP NO output, same M12 4-pin connector, same voltage range and switching frequency. The only meaningful difference is body length: 48 mm on this unit, 70 mm on the TL variant. That affects how much clearance you need behind the sensing face. If your existing panel was drilled for a 70 mm body, the 48 mm will fit with extra room; if a shorter sensor is required and you have the space, the 70 mm also works. Either way, the wiring is identical and no re-pinning needed.