Skip to main content
Log in
Omron E2EX8MB1TL125MOMS — Proximity Sensors

Omron E2EX8MB1TL125MOMS E2E-Next Sensor, 8mm, PNP NO

MPNE2EX8MB1TL125MOMS

Omron E2E-Next inductive proximity sensor, E2EX8MB1TL125MOMS, PNP Normally Open, 8 mm sensing distance, non-flush, M12 brass nickel plated, 5 m cable, IP67/IP69K.

$103.01 – $116.77Ref. price · indicative, final on quote
Omron E2EX8MB1TL125MOMS datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

E2EX8MB1TL125MOMS — Identification
ParameterValue
SeriesE2E-Next
E2EX8MB1TL125MOMS — Sensing
ParameterValue
Sensing distance, max.8 mm
E2EX8MB1TL125MOMS — Electrical
ParameterValue
Operating voltage, max.30 V
Operating voltage, min.10 V
Termination typeCable, 5 m
E2EX8MB1TL125MOMS — Output
ParameterValue
Switching frequency800 Hz
Load current200 mA
E2EX8MB1TL125MOMS — Mechanical
ParameterValue
Mounting typeNon Flush Mount
Length69.1 mm
Housing materialBrass Nickel Plated
E2EX8MB1TL125MOMS — Environmental
ParameterValue
Operating temperature, max.85 °C
Operating temperature, min.-40 °C
IP protection ratingIP67;IP67G;IP69K
E2EX8MB1TL125MOMS — Other specifications
ParameterValue
Construction formM12
Current consumption16 mA
Inductive sensor output typePNP, NO

Product details

The E2EX8MB1TL125MOMS belongs to the current E2E-Next product line. The 5 m cable length is fixed; if your panel layout calls for a shorter pigtail, the 2 m version E2EX8MB1TL122MOMS is a direct functional swap with the same body length and ratings.

Non-flush mounting means the sensing face needs free space around it—no metal flush with the target side. Brass nickel plated housing handles washdown and mild caustic exposure at operating temperatures from -40 to 85 °C. The output is rated 200 mA, enough to drive a relay coil or PLC input directly. Switching at 800 Hz suits moderate-speed part detection; higher rates require a faster sensor.

Frequently asked questions

When sourcing E2EX8MB1TL125MOMS, what is the closest functional alternative—E2EX8MB1TL12M1OMS?

Yes, E2EX8MB1TL12M1OMS is functionally identical except for termination: it uses a M12 quick-disconnect instead of the 5 m cable. Sensing distance, output type, frequency, and IP rating are the same. The choice comes down to whether your panel requires a fixed cable or a removable connector.

What is the listed length of the E2EX8MB1TL125MOMS?

The overall length of the sensor body is 69.1 mm.

What series does the E2EX8MB1TL125MOMS belong to?

It is part of the Omron E2E-Next series of inductive proximity sensors.

Will E2EX8MB1TL125MOMS drop into a panel designed for E2EX8MB1TL12M1OMS without rewiring?

No. The cable version requires a fixed pigtail connection to terminals, while the connector version uses a M12 plug. Rewiring is necessary unless you add a mating connector to the panel side.

MPN
E2EX8MB1TL125MOMS