Active production — sourcing for the commissioning window
The E2EX9B1T12M1OMS: This inductive proximity sensor from the E2E series delivers a 9 mm sensing distance on mild steel in a flush-mount M12 barrel — the flush mounting means it can be embedded in the machine frame without a standoff, saving panel space.
PNP NO output at 700 Hz switching frequency — the 700 Hz ceiling means the sensor can track fast-moving targets on a conveyor or rotary indexer without the PLC input missing edges; if your line runs above 700 Hz, the output pulse width shortens and the downstream input filter may drop counts. IP67 protection rating — the brass nickel-plated housing and M12 connector seal withstand washdown, so this sensor fits on packaging lines or machining centres where coolant spray is routine. Operates on 10–30 VDC, drawing 16 mA with a load current capacity of 50 mA — the 16 mA supply draw is low enough for a standard 24 VDC PLC output card to power it without a separate supply.
Flush-mount M12 barrel, 48 mm body length — the flush rating means it can be mounted in a steel bracket without derating the sensing range, which is critical when the sensor is recessed into a fixture. M12 connector termination — pre-wired cordsets with a mating M12 female connector simplify replacement; no need to pull new cable through the conduit when the sensor fails.