Omron E2F series M18 flush inductive proximity sensor, NO output, 5mm sensing range, 10-30 VDC, 200 mA load, 2m PVC cable, IP67.
| Parameter | Value |
|---|---|
| Series | E2F |
| Parameter | Value |
|---|---|
| Sensing distance, max. | 5 mm |
| Parameter | Value |
|---|---|
| Operating voltage, max. | 30 V |
| Operating voltage, min. | 10 V |
| Termination type | Cable, 2 m |
| Parameter | Value |
|---|---|
| Switching frequency | 600 Hz |
| Load current | 200 mA |
| Parameter | Value |
|---|---|
| Mounting type | Flush Mount |
| Length | 40 mm |
| Housing material | Plastic |
| Parameter | Value |
|---|---|
| Operating temperature, max. | 70 °C |
| Operating temperature, min. | -25 °C |
| IP protection rating | IP67 |
The E2FX5F12MOMS: M18 cylindrical inductive proximity sensor, flush mount rated for 5 mm from a ferrous target. Output is a normally-open NPN (make contact) rated 200 mA at 10–30 VDC. Switching frequency of 600 Hz suits part-present detection on moderate-speed conveyors or discrete positioning. The 2 m integral cable and IP67 sealing keep it working in washdown areas.
No. The E2FX10F12MOMS is an M30 sensor (36 mm hex, 30 mm thread) versus the M18 (24 mm hex, 18 mm thread) of this part. You would need to enlarge the panel hole.
No related articles