E2SW111MOMS is a 6.4 mm square inductive proximity sensor from the E2S series, delivering a 1.5 mm sensing distance with a normally open (NO) output. It operates on 10–30 VDC, switching at 1 kHz, and is rated IP67 for wet or dusty environments. The non-flush mount and plastic housing make it a straightforward drop-in for tight machine frames where a smaller footprint matters more than range.
Comparison with E2SW211MOMS
The same-series sibling has width 8 mm and sensing distance 2.5 mm.
Installation and Integration Notes
Non-flush mount: the sensor face should not be countersunk into metal; allow free space around the active face as per standard inductive derating rules. The 1 m PVC cable carries three wires (brown/blue/black for NO). Supply 10–30 VDC and connect the load between black and brown (normally open). IP67 means it withstands washdown — check cable gland entry for proper seal. The 6.4 mm body fits M6 brackets or custom holders; confirm mounting hole clearance for the 22 mm length.