Omron E2S series inductive proximity sensor, E2SW211MOMS, 2.5 mm, NO, IP67, cable 1 m.
| Parameter | Value |
|---|---|
| Series | E2S |
| Parameter | Value |
|---|---|
| Sensing distance, max. | 2.5 mm |
| Parameter | Value |
|---|---|
| Operating voltage, max. | 30 V |
| Operating voltage, min. | 10 V |
| Termination type | Cable, 1 m |
| Parameter | Value |
|---|---|
| Switching frequency | 1 kHz |
| Load current | 50 mA |
| Parameter | Value |
|---|---|
| Mounting type | Non Flush Mount |
| Length | 23 mm |
| Housing material | Plastic |
| Parameter | Value |
|---|---|
| Operating temperature, max. | 70 °C |
| Operating temperature, min. | -25 °C |
| IP protection rating | IP67 |
The E2SW211MOMS: Body is 8 mm square by 23 mm long, with a 1-meter cable. Small enough to tuck into tight spots on a bearing housing.
The E2SQ211MOMS is electrically identical but measures 9 mm square – won't drop into the same 8 mm hole. The E2SW111MOMS packs a 6.4 mm body but only senses 1.5 mm. So this one gives you the 2.5 mm reach in an 8 mm package.
Width is 8 mm and height is 8 mm.
No. E2SQ211MOMS has a 9 mm square body; this one is 8 mm square, so the mounting hole pattern doesn't match without redrilling.
Sensing distance 2.5 mm, IP67 protection, normally open output, switching frequency 1 kHz, operating voltage 10-30 VDC, and load current 50 mA.
No related articles