Key specs at a glance
This Omron E3SCD112MOMS is a diffuse reflective photoelectric sensor from the E3S-C series. It detects objects up to 700 mm away using an infrared LED, and it offers both NPN and PNP outputs in a single housing so you can wire it to either a sinking or sourcing PLC input without an extra converter. Response time is 1 ms, adequate for most packaging and material handling lines. The IP67 rating allows installation in wet areas or washdown zones. Mounts in a 20.4 mm wide footprint, with a 2 m cable for sensor-to-controller connections. Operating voltage range covers 10 to 30 VDC; load current is 100 mA max.
How it compares to E3SCD11M1J03MOMS
The E3SCD11M1J03MOMS shares every electrical and dimensional spec — same 20.4 mm width, 700 mm range, IP67, dual outputs. The only difference is termination: the E3SCD112MOMS comes with a 2 m cable, while the E3SCD11M1J03MOMS is supplied as a pre-wired unit (typically a short pigtail or no cable). If your panel layout calls for a fixed 2 m cable, this is the exact fit. If you prefer to add your own cable or connector, the pre-wired variant avoids paying for cable you will cut off.