Skip to main content
Omron E3SCL25MOMS — Proximity Sensors

Omron E3SCL25MOMS Photoelectric Sensor, 500mm IR, NPN/PNP

MPNE3SCL25MOMS

Omron E3S-C series, E3SCL25MOMS photoelectric proximity sensor, 500 mm sensing range, infrared LED, NPN/PNP output, IP67, 5 m cable, 15.4 mm width.

$418.47Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

E3SCL25MOMS — Identification
ParameterValue
SeriesE3S-C
E3SCL25MOMS — Sensing
ParameterValue
Sensing distance, max.500 mm
E3SCL25MOMS — Electrical
ParameterValue
Operating voltage, max.30 V
Operating voltage, min.10 V
Termination typeCable, 5 m
E3SCL25MOMS — Output
ParameterValue
Load current100 mA
E3SCL25MOMS — Mechanical
ParameterValue
Length40 mm
E3SCL25MOMS — Environmental
ParameterValue
Operating temperature, max.55 °C
Operating temperature, min.-25 °C
IP protection ratingIP67

Product details

The Omron E3SCL25MOMS is a photoelectric proximity sensor from the E3S-C family, sized for general object detection in automation lines, conveyors, and packaging equipment. It carries a 500 mm sensing range on infrared LED, with dual NPN/PNP output that lets a single part number cover both sourcing conventions — a practical move for BOM consolidation. Rated IP67, the housing withstands washdown and dust ingress; the 5 m cable simplifies installation where a local junction box isn't in the loop. Response time sits at 2 ms, adequate for moderate-speed discrete part detection. Light-ON / Dark-ON selectable on the fly via the wiring.

Frequently asked questions

What is the sensing range of the Omron E3SCL25MOMS?

500 mm maximum, 5 mm minimum, on infrared light.

Is the E3SCL25MOMS NPN or PNP output?

Both. It provides dual NPN and PNP outputs, selectable by wiring.

What is the IP rating of the E3SCL25MOMS?

IP67, rated for dust-tight and temporary immersion.

What cable length does the E3SCL25MOMS come with?

A 5 m pre-attached cable.

Will E3SCL25MOMS drop into a panel specified around E3SCL2M1J03MOMS without rewiring?

Yes. Both sensors share the same physical dimensions (15.4 mm width) and same wiring pinout. The swap is mechanical and electrical drop-in, but confirm the sensing logic difference: E3SCL25MOMS is a standard proximity sensor, E3SCL2M1J03MOMS is a distance-setting sensor.

MPN
E3SCL25MOMS