The Omron E5CC-CX3D5M-005 is a 1/16 DIN process and temperature controller from the E5CC series, accepting RTD and thermocouple types B, E, J, K, L, N, PLII, R, S, T, U, W plus 0–20 mA and 0–10 VDC linear inputs over a span from -200°C to 2300°C. It runs on a 24 VAC/DC supply, which is the standard control voltage for panels with a 24 VDC power bus — no need for a separate 100–240 VAC transformer tap. The output complement is one analog signal (likely 4–20 mA or 0–10 V for driving an SSR or valve positioner) plus three relay outputs rated for on/off or alarm duties. The IP66 front-panel rating means the face and bezel withstand washdown and high-humidity environments — suitable for food-processing, pharmaceutical, or outdoor cabinet installations where hose-down cleaning is routine.
Panel cutout is a standard 45.00 mm square, the 1/16 DIN footprint that fits existing punch patterns without adapter plates. Termination is via screw terminals, so the panel builder lands field wiring directly — no special connector or backplane required. Operating temperature range of -10°C to 55°C covers most indoor control-panel ambients; derating may apply above 40°C for the analog output accuracy.