Skip to main content
Log in
Omron E5CC-CX3D5M-007 — Process / Temperature Controllers

Omron E5CC-CX3D5M-007 Process Temp Controller, 24VAC/DC

MPNE5CC-CX3D5M-007
Active

Omron E5CC series, Process/Temperature Controller (RTD, TC, 0-20mA, 0-10V), 24VAC/DC supply, screw terminal, PID control, event input, IP66 front panel.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

E5CC-CX3D5M-007 — Identification
ParameterValue
SeriesE5CC
TypeProcess, Temperature Controller (RTD, Type B, E, J, K, L, N, PLII, R, S, T, U, W)
E5CC-CX3D5M-007 — Electrical
ParameterValue
Supply voltage24VAC/DC
E5CC-CX3D5M-007 — Performance
ParameterValue
Control methodOn/Off, Proportional (PID)
FeaturesEvent Input
E5CC-CX3D5M-007 — I/O
ParameterValue
Input range-200°C ~ 2300°C, 0 ~ 20mA, 0 ~ 10VDC
Output typeAnalog, Relay (3)
E5CC-CX3D5M-007 — Display
ParameterValue
Display typeLCD - Dual Color Characters, Backlight
Characters per row4, 4
Character height0.600" (15.20mm), 0.280" (7.10mm)
E5CC-CX3D5M-007 — Environmental
ParameterValue
Operating temperature-10°C ~ 55°C
Ingress protection (IP rating)IP66 - Dust Tight, Water Resistant
E5CC-CX3D5M-007 — Mechanical
ParameterValue
Mounting typePanel Mount
Panel cutout dimensionsSquare - 45.00mm x 45.00mm
Termination styleScrew Terminal

Product details

What sets it apart from the E5CC-CX3A5M-004

The E5CC-CX3D5M-007: If your BOM originally specified the E5CC-CX3A5M-004, note the two key differences: power supply and communications. The CX3A5M-004 runs on 100–240VAC and includes RS-485 (CompoWay/F, Modbus). The CX3D5M-007 runs on 24VAC/DC and does not have built-in communications — the only serial port is absent. The physical footprint, cutout (45mm square), terminal layout, and output configuration are identical. A panel wired for the 100–240V version will need the power input changed to 24V; if RS-485 was used on the previous controller, that function is lost unless a separate communications adapter is added. For a pure analog setup without a network, the CX3D5M-007 is a direct mechanical swap.

Frequently asked questions

What is the closest functional alternative to this controller?

The E5CC-CX3A5M-004 is the closest peer in the E5CC series. It adds RS-485 communications and runs on 100–240VAC instead of 24VAC/DC. The output configuration (analog + 3 relays), panel cutout, and terminal layout are the same.

Will the E5CC-CX3D5M-007 drop into a panel built for the E5CC-CX3A5M-004 without rewiring?

Mechanically yes — same 45mm square cutout, same screw terminal layout. Electrically, the supply voltage must be changed from 100–240VAC to 24VAC/DC. If the original used RS-485 for serial communication, that function is not available on this variant.

MPN
E5CC-CX3D5M-007