Skip to main content
Omron E5CC-QQ3A5M-005

Omron E5CC-QQ3A5M-005 Temperature Controller

MPN E5CC-QQ3A5M-005
Active

Omron E5CC-QQ3A5M-005, Process/Temperature Controller, RTD/TC/analog input, 100-240 VAC supply, Relay (3) + Voltage (External SSR) (2) outputs, IP66 front, 45x45 mm panel cutout.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

E5CC-QQ3A5M-005 specifications
ParameterValue
SeriesE5CC
Output signalRelay (3), Voltage (External SSR) (2)
Supply voltage100 to 240VAC
IP ratingIP66
MountingPanel Mount
Temp operating max55 °C
Temp operating min-10 °C
Weight0.265 lb (120.2 g)
PackageBox
Control methodOn/Off, Proportional (PID)

Product details

Output mix: three relays plus two SSR drive outputs

The E5CC-QQ3A5M-005 carries three relay outputs for on/off control, alarm, or event signaling, plus two voltage-pulse outputs for driving external solid-state relays (SSRs). That dual-output architecture means you can run a PID-heated zone with the SSR pair for fast cycling and use the relays for high-limit alarms or secondary contactors — no separate interposing relay needed.

Universal input spans TC, RTD, and process signals

The input stage accepts thermocouple types B, E, J, K, L, N, PLII, R, S, T, U, W, plus RTD, and also handles 0-20 mA or 0-10 VDC process signals. The range of -200°C to 2300°C covers cryogenic to high-temp furnace work. Commissioning note: the input type is set in software, not DIP switches — you'll need the front-panel menu or CX-Thermo software to configure it.

Panel fit: IP66 front, standard 1/16 DIN cutout

The front bezel is rated IP66, so it handles washdown spray without a secondary cover. The panel cutout is a square 45.00 mm x 45.00 mm — the standard 1/16 DIN hole. Depth behind the panel is tight; screw terminals are on the rear, so leave clearance for wiring ducts and finger access.

MPN
E5CC-QQ3A5M-005