Skip to main content
Omron E5CC-QQ3A5M-007 — Process / Temperature Controllers

Omron E5CC-QQ3A5M-007 Temp Controller, Event Input

MPNE5CC-QQ3A5M-007
Active

Omron E5CC, Process/Temperature Controller, 1/16 DIN, Relay (3) + Voltage (External SSR) (2) outputs, Event Input, 100-240VAC, Screw Terminal, IP66.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

E5CC-QQ3A5M-007 — Identification
ParameterValue
SeriesE5CC
TypeProcess, Temperature Controller (RTD, Type B, E, J, K, L, N, PLII, R, S, T, U, W)
E5CC-QQ3A5M-007 — Electrical
ParameterValue
Supply voltage100 ~ 240VAC
E5CC-QQ3A5M-007 — Performance
ParameterValue
Control methodOn/Off, Proportional (PID)
FeaturesEvent Input
E5CC-QQ3A5M-007 — I/O
ParameterValue
Input range-200°C ~ 2300°C, 0 ~ 20mA, 0 ~ 10VDC
Output typeRelay (3), Voltage (External SSR) (2)
E5CC-QQ3A5M-007 — Display
ParameterValue
Display typeLCD - Dual Color Characters, Backlight
Characters per row4, 4
Character height0.600" (15.20mm), 0.280" (7.10mm)
E5CC-QQ3A5M-007 — Environmental
ParameterValue
Operating temperature-10°C ~ 55°C
Ingress protection (IP rating)IP66 - Dust Tight, Water Resistant
E5CC-QQ3A5M-007 — Mechanical
ParameterValue
Mounting typePanel Mount
Panel cutout dimensionsSquare - 45.00mm x 45.00mm
Termination styleScrew Terminal

Product details

Panel fit and signal wiring

The E5CC-QQ3A5M-007: Mounts in a 45mm square panel cutout with screw terminals. The IP66 front face resists washdown spray. The event input can be assigned as an alarm reset, remote run/hold, or timer start — useful when a discrete signal from a PLC or pushbutton replaces a Modbus command. Dual-color LCD display (0.600" main, 0.280" secondary) shows process value and setpoint side-by-side. Operates from 100-240VAC, -10°C to 55°C ambient.

Quoted to order. Verify the event input and output count against your panel wiring diagram before ordering.

Frequently asked questions

What is the closest functional alternative?

The E5CC-CX3A5M-004 adds RS-485 Modbus and a single analog output, but removes the event input. It is a physical drop-in but not a functional swap without I/O map changes.

Will the E5CC-QQ3A5M-007 drop into a panel cut out for the E5CC-CX3A5M-004?

Yes, the 45mm square cutout, screw terminals, and 100-240VAC supply are identical. The wiring and I/O functionality differ, so verify the event input vs analog/comms requirement.

MPN
E5CC-QQ3A5M-007