The E5CC-QX2ABM-004: Spring-cage terminals simplify panel wiring — no screw torqueing, faster field replacement. RS-485 port supports CompoWay/F and Modbus. Front face rated IP66 (dust tight and water resistant) so it cleans up with a hose-down in washdown areas. Panel cutout is the standard 45×45 mm square.
Compared to the E5CC-CX3A5M-005
The E5CC-CX3A5M-005 has a 3-relay + analog output and uses screw terminals; the E5CC-QX2ABM-004 trades the analog output for a dedicated voltage output (external SSR) and switches to spring terminals. Same 45 mm cutout, same IP66, same RS-485 and multi-type input. If your current panel is wired to a screw-terminal controller expect to change the terminal blocks — spring terminals require a different strip-and-insert motion and don't accept ferruled wires the same way. The dual relay + SSR voltage pair is common in PID heater control where one relay handles alarm and the voltage output drives the SCR/SSR directly.
Sourcing & Lifecycle
Marked as an active current-production model. Available to quote against your BOM line — lead time depends on factory load and your geographic region, but the part is not subject to any last-time-buy deadline or allocation freeze.