Skip to main content
Log in
Omron E5CC-QX2DBM-002 — Process / Temperature Controllers

Omron E5CC-QX2DBM-002 Process Controller, 24VAC/DC

MPNE5CC-QX2DBM-002
Active

Omron E5CC-QX2DBM-002, Process / Temperature Controller, 24VAC/DC supply, 2 relay outputs + voltage for external SSR, RS-485 Modbus, IP66, 45mm panel cutout.

Omron E5CC-QX2DBM-002 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

E5CC-QX2DBM-002 — Identification
ParameterValue
SeriesE5CC
TypeProcess, Temperature Controller (RTD, Type B, E, J, K, L, N, PLII, R, S, T, U, W)
E5CC-QX2DBM-002 — Electrical
ParameterValue
Supply voltage24VAC/DC
E5CC-QX2DBM-002 — Performance
ParameterValue
Control methodOn/Off, Proportional (PID)
FeaturesHeater Fault Detection
E5CC-QX2DBM-002 — I/O
ParameterValue
Input range-200°C ~ 2300°C, 0 ~ 20mA, 0 ~ 10VDC
Output typeRelay (2), Voltage (External SSR)
E5CC-QX2DBM-002 — Communication
ParameterValue
Communication interfacesRS-485 (CompoWay/F, Modbus)
E5CC-QX2DBM-002 — Display
ParameterValue
Display typeLCD - Dual Color Characters, Backlight
Characters per row4, 4
Character height0.600" (15.20mm), 0.280" (7.10mm)
E5CC-QX2DBM-002 — Environmental
ParameterValue
Operating temperature-10°C ~ 55°C
Ingress protection (IP rating)IP66 - Dust Tight, Water Resistant
E5CC-QX2DBM-002 — Mechanical
ParameterValue
Mounting typePanel Mount
Panel cutout dimensionsSquare - 45.00mm x 45.00mm
Termination styleSpring Terminal

Product details

Active production, 24 V supply, dual output drive

The Omron E5CC-QX2DBM-002 is an active-production 1/16 DIN temperature and process controller with a 24VAC/DC supply rail — no 100-240 VAC primary needed, which simplifies panel wiring in low-voltage control cabinets. It drives two relay outputs for on/off or alarm functions plus a voltage pulse output for an external SSR, giving you PID or on/off control with heater fault detection monitoring the load current. RS-485 communications support Modbus and CompoWay/F protocols, so it integrates into a PLC-based control network without a separate gateway.

Sensor input range and panel sealing

Accepts RTD and twelve thermocouple types (B, E, J, K, L, N, PLII, R, S, T, U, W) covering -200°C to 2300°C, plus 0-20 mA or 0-10 VDC linear process inputs — one controller handles both temperature and analog signals. The front panel carries an IP66 rating — dust-tight and protected against hose-directed water — so it can be mounted on a machine panel in washdown zones without a separate cover. Spring-terminal connections replace screw clamps; no tool needed for solid or ferruled stranded wire, and the vibration resistance is better than a screw terminal under continuous machine cycling.

Frequently asked questions

How many outputs does the E5CC-QX2DBM-002 have?

Two relay outputs plus a voltage pulse output for driving an external SSR — three control channels total, though the relay count is two.

What panel cutout size does the Omron E5CC use?

A square 45.00 mm x 45.00 mm cutout — the standard 1/16 DIN footprint. The controller is panel-mounted with the included clamp.

What is the difference between E5CC-QX2DBM-002 and E5CC-QX3DBM-002?

The E5CC-QX2DBM-002 has two relay outputs plus voltage for an external SSR. The E5CC-QX3DBM-002 adds an event input and a third relay output, but drops heater fault detection. The supply voltage, communications, and panel cutout remain the same.

MPN
E5CC-QX2DBM-002