Skip to main content
Log in
Omron E5CC-QX2DUM-800 — Process / Temperature Controllers

Omron E5CC-QX2DUM-800 Process Controller, 24VAC/DC 2 Relay+S

MPNE5CC-QX2DUM-800
Active

Omron E5CC series, Process/Temperature Controller, 24VAC/DC, Relay (2) + Voltage (External SSR), Panel Mount, IP66, Octal 11-pin plug-in.

Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

E5CC-QX2DUM-800 — Identification
ParameterValue
SeriesE5CC
TypeProcess, Temperature Controller (RTD, Type B, E, J, K, L, N, PLII, R, S, T, U, W)
E5CC-QX2DUM-800 — Electrical
ParameterValue
Supply voltage24VAC/DC
E5CC-QX2DUM-800 — Performance
ParameterValue
Control methodOn/Off, Proportional (PID)
E5CC-QX2DUM-800 — I/O
ParameterValue
Input range-200°C ~ 2300°C, 0 ~ 20mA, 0 ~ 10VDC
Output typeRelay (2), Voltage (External SSR)
E5CC-QX2DUM-800 — Display
ParameterValue
Display typeLCD - Dual Color Characters, Backlight
Characters per row4, 4
Character height0.600" (15.20mm), 0.280" (7.10mm)
E5CC-QX2DUM-800 — Environmental
ParameterValue
Operating temperature-10°C ~ 55°C
Ingress protection (IP rating)IP66 - Dust Tight, Water Resistant
E5CC-QX2DUM-800 — Mechanical
ParameterValue
Mounting typePanel Mount
Panel cutout dimensionsSquare - 45.00mm x 45.00mm
Termination stylePlug In, 11 Pin (Octal)
E5CC-QX2DUM-800 — Other specifications
ParameterValue
Weight0.265 lb (120.2 g)

Product details

What this controller is and who needs it

The Omron E5CC-QX2DUM-800 is a panel-mount process/temperature controller from the E5CC series, accepting RTD, thermocouple (B, E, J, K, L, N, PLII, R, S, T, U, W), 0–20mA, and 0–10VDC inputs over a span of -200°C to 2300°C. It runs on 24VAC/DC and drives two relay outputs plus a voltage output for an external SSR — a compact PID/on-off controller for machines where the power supply is 24V and you need both relay and solid-state drive. This variant uses a standard 45mm square panel cutout and an IP66-rated front bezel. The rear termination is an 11-pin octal plug-in base, requiring a matching socket for wiring.

Frequently asked questions

What is the E5CC-QX2DUM-800's series?

It belongs to Omron's E5CC series of process and temperature controllers.

Will the E5CC-QX2DUM-800 drop into a panel that was specified around the E5CC-CX3A5M-004 without rewiring?

No, the CX3A5M-004 uses screw terminals, 100–240VAC, and has RS-485 communications, while the QX2DUM-800 uses an octal plug-in base and 24VAC/DC. The panel cutout is the same 45mm square, but the wiring and power supply must be changed.

MPN
E5CC-QX2DUM-800