Skip to main content
Log in
Omron E5CC-RX2DBM-002 — Process / Temperature Controllers

Omron E5CC-RX2DBM-002 Temperature Controller, 24VAC/DC

MPNE5CC-RX2DBM-002
Active

Omron E5CC series process temperature controller, 24VAC/DC supply, 3 relay outputs, RS-485 (CompoWay/F, Modbus), spring terminal, IP66 front panel, 45mm square cutout.

Omron E5CC-RX2DBM-002 datasheet (PDF)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

E5CC-RX2DBM-002 — Identification
ParameterValue
SeriesE5CC
TypeProcess, Temperature Controller (RTD, Type B, E, J, K, L, N, PLII, R, S, T, U, W)
E5CC-RX2DBM-002 — Electrical
ParameterValue
Supply voltage24VAC/DC
E5CC-RX2DBM-002 — Performance
ParameterValue
Control methodOn/Off, Proportional (PID)
FeaturesHeater Fault Detection
E5CC-RX2DBM-002 — I/O
ParameterValue
Input range-200°C ~ 2300°C, 0 ~ 20mA, 0 ~ 10VDC
Output typeRelay (3)
E5CC-RX2DBM-002 — Communication
ParameterValue
Communication interfacesRS-485 (CompoWay/F, Modbus)
E5CC-RX2DBM-002 — Display
ParameterValue
Display typeLCD - Dual Color Characters, Backlight
Characters per row4, 4
Character height0.600" (15.20mm), 0.280" (7.10mm)
E5CC-RX2DBM-002 — Environmental
ParameterValue
Operating temperature-10°C ~ 55°C
Ingress protection (IP rating)IP66 - Dust Tight, Water Resistant
E5CC-RX2DBM-002 — Mechanical
ParameterValue
Mounting typePanel Mount
Panel cutout dimensionsSquare - 45.00mm x 45.00mm
Termination styleSpring Terminal
E5CC-RX2DBM-002 — Other specifications
ParameterValue
Weight0.265 lb (120.2 g)

Product details

24 VAC/DC supply, 3 relay outputs, RS-485 Modbus

The Omron E5CC-RX2DBM-002 is a 1/16 DIN process temperature controller running on a 24 VAC/DC supply — the same rail that powers most panel PLCs and sensors, so no separate control transformer is needed for the controller itself. Its three relay outputs handle on/off or PID control loops for heating/cooling zones, plus an alarm or event output, without needing an external SSR for basic switching. RS-485 communication with Modbus RTU (and Omron's CompoWay/F protocol) lets it talk directly to a PLC or SCADA host over a two-wire bus — no gateway required for the fieldbus layer.

Spring terminals, IP66 front, heater fault detection

The IP66-rated front bezel seals against washdown splashes and dust ingress when the gasket is seated against the panel cutout; the rear of the housing is not sealed, so the enclosure behind the panel still needs its own protection rating. Built-in heater fault detection monitors the load current via an external CT (not included) and flags a broken heater element or SSR short — saves a walk to the machine when a zone goes cold.

Frequently asked questions

Does the E5CC-RX2DBM-002 support Modbus communication?

Yes, it supports RS-485 communication using both Modbus RTU and Omron's CompoWay/F protocol, so it integrates directly with a PLC or SCADA host over a two-wire bus without an external gateway.

What is the output type and number of relays on the E5CC-RX2DBM-002?

It has three relay outputs — typically configured for control output 1 (heat), control output 2 (cool or alarm), and a third auxiliary output (event or transfer alarm). Each relay is a dry contact rated for the controller's load specification.

What is the panel cutout size for the E5CC-RX2DBM-002?

The panel cutout is a 45.00 mm x 45.00 mm square — the standard 1/16 DIN hole. The controller mounts from the front with the provided clamp bracket; the IP66 gasket must seat against the panel face for the seal to hold.

What input types and ranges does the E5CC-RX2DBM-002 accept?

It accepts RTD (Pt100) and thermocouple types B, E, J, K, L, N, PLII, R, S, T, U, W covering -200°C to 2300°C, plus analog signals 0–20 mA and 0–10 VDC — so it handles most common process sensors without an external signal conditioner.

How can I order the Omron E5CC-RX2DBM-002 and check availability?

The E5CC-RX2DBM-002 is sourced to order against an RFQ through independent distribution. Submit a quote request with your BOM quantity; current pricing and lead time are confirmed at quote time — no stock-holding claim on this listing.

MPN
E5CC-RX2DBM-002