What this controller does and where it fits
The Omron E5CC-TCX3A5M-005 is a 1/16 DIN panel-mount process and temperature controller that reads RTD, thermocouple (B, E, J, K, L, N, PLII, R, S, T, U, W), 0-20mA, or 0-10VDC signals. That input range covers everything from a -200°C cryo bath to a 2300°C furnace thermocouple, plus linear transmitters for pressure or flow. It runs on 100-240VAC, so it drops into panels wired for either North American or European line voltages without a separate supply module. The front panel carries an IP66 rating — dust-tight and water-resistant — which means it survives washdown on the cabinet door in food, beverage, or pharmaceutical lines.
Control outputs and display
The controller packs three relay outputs and one analog output. The relays handle on/off or PID-driven switching for heaters, solenoids, or alarms; the analog output drives a modulating valve or SCR power controller with a 0-20mA or 0-10VDC signal. The LCD display shows dual-color characters with a backlight — two rows of four digits each, the top row 0.600" tall, the bottom 0.280". That makes the process value readable from across a panel, while the lower row shows setpoint or alarm status. Control methods include simple on/off and full proportional (PID), so you can tune it for a slow thermal process or a fast pressure loop.
The E5CC-TCX3A5M-005 mounts in a standard 45x45mm square panel cutout — that's the 1/16 DIN size common across Omron's E5CC family. Screw terminals on the back make field wiring straightforward without special tools. Operating temperature is -10°C to 55°C — fine for a ventilated enclosure but not for direct outdoor exposure or a hot machine cabinet without airflow. An event input is included for external trigger functions like setpoint switching or run/hold control.
No stock-holding claim — quoted per inquiry.