Skip to main content
Log in
Omron E5DC-CX2DBM-000 — Process / Temperature Controllers

Omron E5DC-CX2DBM-000 Process Temperature Controller, PID

MPNE5DC-CX2DBM-000
Active

Omron E5DC series, Process Temperature Controller, RTD/TC/mA/V input, analog + 2 relay outputs, PID control, 24VAC/DC, spring terminal, DIN rail mount.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

E5DC-CX2DBM-000 — Identification
ParameterValue
SeriesE5DC
TypeProcess, Temperature Controller (RTD, Type B, E, J, K, L, N, PLII, R, S, T, U, W)
E5DC-CX2DBM-000 — Electrical
ParameterValue
Supply voltage24VAC/DC
E5DC-CX2DBM-000 — Performance
ParameterValue
Control methodOn/Off, Proportional (PID)
E5DC-CX2DBM-000 — I/O
ParameterValue
Input range-200°C ~ 2300°C, 0 ~ 20mA, 0 ~ 10VDC
Output typeAnalog, Relay (2)
E5DC-CX2DBM-000 — Display
ParameterValue
Display typeLCD - Dual Color Characters, Backlight
Characters per row4, 4
Character height0.334" (8.50mm), 0.314" (8.00mm)
E5DC-CX2DBM-000 — Environmental
ParameterValue
Operating temperature-10°C ~ 55°C
Ingress protection (IP rating)IP20
E5DC-CX2DBM-000 — Mechanical
ParameterValue
Mounting typeDIN Rail
Termination styleSpring Terminal

Product details

DIN-rail temperature controller with universal input

The Omron E5DC-CX2DBM-000 is a DIN-rail-mount process temperature controller accepting RTD, thermocouple (Types B, E, J, K, L, N, PLII, R, S, T, U, W), 0–20 mA, or 0–10 VDC inputs — covering the sensor types you find across a typical plant floor without swapping modules. It delivers both an analog output and two relay outputs, so a single unit can drive a proportional valve or SCR and also trigger an alarm or on/off backup loop. Control method includes On/Off and full PID with autotune, meaning it can handle everything from a simple oven band to a process loop that needs tight overshoot management.

Spring-terminals and 24 V supply for panel integration

Runs on 24 VAC/DC, so it can share a common control transformer or DC bus with PLCs and sensors without a separate power supply tap. IP20 rating means it belongs inside a clean enclosure; the dual-color LCD backlight (8.5 mm and 8.0 mm character heights) is readable from a few metres across the cabinet.

Frequently asked questions

Does the E5DC-CX2DBM-000 support PID control?

Yes. The E5DC-CX2DBM-000 supports On/Off and Proportional (PID) control methods, making it suitable for processes requiring closed-loop temperature regulation.

What is the closest functional second-source for E5DC-CX2DBM-000?

The E5DC-QX2DSM-017 is the closest peer in the same E5DC series. The key difference is the output complement: the CX2DBM-000 provides an analog output plus two relays, whereas the QX2DSM-017 provides two relays plus a voltage output for an external SSR. The QX2DSM-017 also uses screw terminals instead of spring terminals and adds an event input and heater fault detection.

Can the E5DC-CX2DBM-000 be used with a PT100 RTD sensor?

Yes. The controller accepts RTD inputs, which includes PT100 sensors, across its -200°C to 2300°C input range.

MPN
E5DC-CX2DBM-000