Skip to main content
Log in
Omron E5DC-QX0ABM-015 — Process / Temperature Controllers

Omron E5DC-QX0ABM-015 Temperature Controller, SSR Output

MPNE5DC-QX0ABM-015
Active

Omron E5DC series process temperature controller, DIN rail mount, voltage (external SSR) output, RS-485 communications, 100-240VAC supply, spring terminal.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

E5DC-QX0ABM-015 — Identification
ParameterValue
SeriesE5DC
TypeProcess, Temperature Controller (RTD, Type B, E, J, K, L, N, PLII, R, S, T, U, W)
E5DC-QX0ABM-015 — Electrical
ParameterValue
Supply voltage100 ~ 240VAC
E5DC-QX0ABM-015 — Performance
ParameterValue
Control methodOn/Off, Proportional (PID)
E5DC-QX0ABM-015 — I/O
ParameterValue
Input range-200°C ~ 2300°C, 0 ~ 20mA, 0 ~ 10VDC
Output typeVoltage (External SSR)
E5DC-QX0ABM-015 — Communication
ParameterValue
Communication interfacesRS-485 (CompoWay/F, Modbus)
E5DC-QX0ABM-015 — Display
ParameterValue
Display typeLCD - Dual Color Characters, Backlight
Characters per row4, 4
Character height0.334" (8.50mm), 0.314" (8.00mm)
E5DC-QX0ABM-015 — Environmental
ParameterValue
Operating temperature-10°C~55°C
Ingress protection (IP rating)IP20
E5DC-QX0ABM-015 — Mechanical
ParameterValue
Mounting typeDIN Rail
Termination styleSpring Terminal

Product details

DIN-rail temperature controller with external SSR drive

The Omron E5DC-QX0ABM-015 is a DIN-rail-mounted process temperature controller that outputs a voltage signal to drive an external solid-state relay (SSR). This means the switching element is separate from the controller — the SSR handles the load current, while the controller provides the logic and setpoint. It accepts inputs from RTDs, thermocouples (B, E, J, K, L, N, PLII, R, S, T, U, W), 0-20 mA current loops, and 0-10 VDC signals, covering a wide range of process sensors.

RS-485 Modbus and control loop

Built-in RS-485 communications supports both CompoWay/F and Modbus protocols, so the controller integrates directly into a PLC or SCADA network without an extra gateway. The control method is On/Off or proportional (PID), which covers simple threshold switching through to closed-loop temperature regulation.

Power supply and wiring

Powered from 100-240 VAC, universal line voltage — no separate control transformer needed for most panels. Termination is via spring terminals, which speeds wiring compared to screw clamps: push the ferrule or stripped wire in, and the cage clamps it. The IP20 rating means it is intended for a clean, dry enclosure, not a washdown zone.

Frequently asked questions

Does the E5DC-QX0ABM-015 support Modbus communication?

Yes, the E5DC-QX0ABM-015 has RS-485 communications supporting both CompoWay/F and Modbus protocols. This allows direct connection to a PLC or SCADA network for setpoint changes, process value readout, and alarm monitoring.

What is the output type of the Omron E5DC-QX0ABM-015?

The output type is Voltage (External SSR). The controller sends a DC voltage signal to drive an external solid-state relay, which then switches the heating or cooling load. The SSR itself is not included — you select it based on the load current and voltage.

MPN
E5DC-QX0ABM-015