Controller overview for the BOM line
The Omron E5EC-CQ4D5M-000 is a panel-mount process and temperature controller in the E5EC series, supporting RTD and thermocouple types B, E, J, K, L, N, PLII, R, S, T, U, W plus 0–20 mA and 0–10 VDC process inputs. Control is PID or On/Off, fed from a 24 VAC/DC supply. Outputs include four relay contacts, one analog signal, and a voltage output for an external SSR — enough to drive a heater, valve, or alarm string. The display is a backlit LCD with tri‑color characters; character heights are 0.710", 0.433", and 0.307" for three rows of four digits each. Rated IP66 from the front — dust tight and water resistant, so it holds up in a washdown panel environment.
This controller is active with no end-of-life notice. It remains available through normal distribution.
Cross‑reference note: E5CC‑CQ3D5M‑005 vs this E5EC
The closest functional sibling is the E5CC‑CQ3D5M‑005, which has the same input range, control method, supply voltage, and IP66 rating. However, the E5CC uses a square 45 × 45 mm panel cutout, while this E5EC requires a rectangular 92 × 45 mm opening. The E5CC also carries three relay outputs versus four here, and adds an event input. It is not a drop‑in replacement — if your panel is cut for an E5CC, the E5EC will not fit without rework. For a new build or panel redesign, the E5EC gives one more relay and a larger display with three character sizes. The extra relay can serve as a second alarm or a backup control output without needing an external module.