Skip to main content
Log in
Omron E5EC-CX4D5M-013 — Process / Temperature Controllers

Omron E5EC-CX4D5M-013 Process Temp Controller 24VAC/DC PID

MPNE5EC-CX4D5M-013
Active

Omron E5EC Series, Process, Temperature Controller (RTD, Type B, E, J, K, L, N, PLII, R, S, T, U, W), 24VAC/DC, Analog + 4 Relay Outputs, PID, Event Input.

Omron E5EC-CX4D5M-013 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

E5EC-CX4D5M-013 — Identification
ParameterValue
SeriesE5EC
TypeProcess, Temperature Controller (RTD, Type B, E, J, K, L, N, PLII, R, S, T, U, W)
E5EC-CX4D5M-013 — Electrical
ParameterValue
Supply voltage24VAC/DC
E5EC-CX4D5M-013 — Performance
ParameterValue
Control methodOn/Off, Proportional (PID)
FeaturesEvent Input
E5EC-CX4D5M-013 — I/O
ParameterValue
Input range-200°C ~ 2300°C, 0 ~ 20mA, 0 ~ 10VDC
Output typeAnalog, Relay (4)
E5EC-CX4D5M-013 — Display
ParameterValue
Display typeLCD - Tri Color Characters, Backlight
Characters per row4, 4, 4
Character height0.710" (18.00mm), 0.433" (11.00mm), 0.307" (7.80mm)
E5EC-CX4D5M-013 — Environmental
ParameterValue
Operating temperature-10°C ~ 55°C
Ingress protection (IP rating)IP66 - Dust Tight, Water Resistant
E5EC-CX4D5M-013 — Mechanical
ParameterValue
Mounting typePanel Mount
Panel cutout dimensionsRectangular - 92.00mm x 45.00mm
Termination styleScrew Terminal

Product details

At a glance

The Omron E5EC-CX4D5M-013 is a current-production panel-mount process and temperature controller from the E5EC family. It accepts inputs from RTD and a wide range of thermocouples (B, E, J, K, L, N, PLII, R, S, T, U, W) as well as 0–20 mA or 0–10 VDC process signals. The controller provides a proportional (PID) or on/off control algorithm and drives both an analog output and four relay outputs, plus a dedicated event input for remote hold/trigger functions. Supply is 24 VAC/DC, and the housing seals to IP66 for washdown environments.

The rectangular cutout measures 92.00 mm x 45.00 mm; screw terminals accept standard control wiring. The tri-color LCD shows up to four process variables or parameters on three rows (four characters each). The event input can be wired to a limit switch or PLC digital output for remote start/hold. IP66 rating means the front face tolerates hose-down cleaning.

Frequently asked questions

What is the closest functional second-source?

The E5EC-QR4D5M-010 shares the same form factor, supply, and sensor range but trades the analog output for a fifth relay and adds heater fault detection. It is a mechanical swap but not a wiring-compatible replacement.

What sensor types does the controller support?

It accepts RTD and thermocouple types B, E, J, K, L, N, PLII, R, S, T, U, W, plus 0–20 mA and 0–10 VDC process signals, covering a range of -200°C to 2300°C.

Will the E5EC-CX4D5M-013 drop into a panel cut for the E5EC-QR4D5M-010?

Yes, both use the same 92.00 mm x 45.00 mm rectangular cutout and 24 VAC/DC supply. Rewiring is required because the output configuration differs.

What control methods are available?

The controller supports on/off and proportional (PID) control, adjustable via the front panel or event input.

MPN
E5EC-CX4D5M-013