Skip to main content
Omron E5EC-QX4D5M-010 — Process / Temperature Controllers

Omron E5EC-QX4D5M-010 Process Controller, 24VAC/DC

MPNE5EC-QX4D5M-010
Active

Omron E5EC series, Process/Temperature Controller, 24VAC/DC, Panel Mount, Relay + SSR outputs, Event Input, Heater Fault Detection.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

E5EC-QX4D5M-010 — Identification
ParameterValue
SeriesE5EC
TypeProcess, Temperature Controller (RTD, Type B, E, J, K, L, N, PLII, R, S, T, U, W)
E5EC-QX4D5M-010 — Electrical
ParameterValue
Supply voltage24VAC/DC
E5EC-QX4D5M-010 — Performance
ParameterValue
Control methodOn/Off, Proportional (PID)
FeaturesEvent Input, Heater Fault Detection
E5EC-QX4D5M-010 — I/O
ParameterValue
Input range-200°C ~ 2300°C, 0 ~ 20mA, 0 ~ 10VDC
Output typeRelay (4), Voltage (External SSR)
E5EC-QX4D5M-010 — Display
ParameterValue
Display typeLCD - Tri Color Characters, Backlight
Characters per row4, 4, 4
Character height0.710" (18.00mm), 0.433" (11.00mm), 0.307" (7.80mm)
E5EC-QX4D5M-010 — Environmental
ParameterValue
Operating temperature-10°C ~ 55°C
Ingress protection (IP rating)IP66 - Dust Tight, Water Resistant
E5EC-QX4D5M-010 — Mechanical
ParameterValue
Mounting typePanel Mount
Panel cutout dimensionsRectangular - 92.00mm x 45.00mm
Termination styleScrew Terminal

Product details

The E5EC-QX4D5M-010: Event input and heater fault detection are built in, letting you supervise load current and trigger alarms without an add-on module.

Panel fit and reliability – no single point of failure

Mounts in a rectangular 92.00 mm × 45.00 mm panel cutout, so it replaces E5EC-size controllers only — not the compact 45 mm square E5CC. The IP66 front bezel keeps washdown and dust out, rated for operation from –10 to 55 °C. The tri-color LCD backlight gives four rows of four characters each, with the largest digit 18.00 mm tall for readability at a distance. Screw terminals on the rear — no special tooling needed at checkout.

Frequently asked questions

Will it drop into a panel that was spec'd around the E5CC-RX3A5M-003 without modification?

No — the E5EC requires a 92×45 mm rectangular cutout, while the E5CC uses a 45 mm square opening. The supply voltage also differs (24 VAC/DC vs 100–240 VAC), so rewiring and a larger panel hole would be needed.

MPN
E5EC-QX4D5M-010