It provides a protective height of 360mm across 18 beams at a 20mm beam pitch, covering an operating range from 0.3m up to 20m. Supply is 24VDC, and the enclosure carries IP65/IP67/IP67G ratings — dust-tight, water-resistant, and oil-resistant, suitable for washdown environments.
The 25mm detection capability and hand-protection rating mean this curtain is sized for finger and hand detection at the access point — not for body presence only. The 360mm protective height and 18 beams define the guarded zone; match this to the height of the hazard opening. The 20mm beam pitch gives a resolution that stops a hand but allows smaller objects through — typical for press brakes, assembly stations, and robotic cells. The 0.3m to 20m operating range covers both close-in and longer spans; the lower end matters for compact machinery where the emitter and receiver sit near each other. The IP65/IP67/IP67G rating includes oil resistance, so it holds up in machining environments with coolant mist.
Integration Notes
Blanking and muting functions are built in — blanking lets you exclude fixed obstructions (e.g., a fixture post) from the detection zone without disabling the entire curtain; muting allows automatic override during material pass-through when used with external sensors. Both are configured via the controller, not hardwired. The 24VDC supply is standard for safety circuits; confirm the controller's output rating to avoid voltage drop over long cable runs. The bulk package means the unit ships as a single set — emitter, receiver, and mounting brackets are included; no separate accessory kit to order.