That 14 mm detection capability means it catches fingers reaching into the hazard zone — finger-protection class per IEC 61496-1 — so it's the right fit for access points where operator hands can get near the danger area.
Protective height of 400 mm covers a reach-in zone about the width of a small machine access panel. The 39 beams at 10 mm pitch give you that detection field with no dead spots between emitters. Operating range from 0.3 m to 10.0 m — plenty of reach for guarding a conveyor infeed or a press opening without needing a secondary reflector setup. Runs on 24 VDC, which is standard for safety circuits in most panels. IP65/IP67/IP67G rating means the sensor body and optics withstand washdown — suitable for food-and-bev lines or any area where hoses and oil mist are part of the daily routine. The IP67G adds oil resistance, so it holds up in machining centers where coolant is airborne. Temperature range from -30°C to 55°C covers cold storage docks and hot factory floors without derating. Blanking and muting functions are built in, so you can program out fixed obstructions (like a part fixture) and temporarily bypass the curtain during material pass-through — no external controller needed for basic muting logic.