It throws 8 beams at an 80 mm pitch across a 0.3 m to 20.0 m operating range, running on 24 VDC. The enclosure is rated IP65/IP67/IP67G — dust-tight, waterproof, and oil-resistant — so it survives the steam and the chemicals you find on a pulp line or a wet-area conveyor.
The 85 mm detection capability and 80 mm beam pitch tell you this curtain catches a hand or torso, not a fingertip — it is sized for access guarding where an operator reaches into a hazard zone, not for pinch-point finger detection. The 600 mm protective height covers a typical standing operator's reach zone; if your opening is taller, you stack multiple units. The 0.3–20.0 m range gives flexibility across short press openings up to long conveyor entries. IP67G adds oil resistance, which matters on a machine-tool or hydraulic press where coolant mist is constant. Blanking and muting functions are built in — blanking lets you ignore fixed obstructions (a part of the beam field that is always blocked by machine structure), and muting suspends the safety output during a defined material pass cycle. That saves an external safety controller for simple applications. Operating temperature from -30°C to 55°C covers unheated warehouses and hot press-side enclosures.