Its 20 mm beam pitch and 50 beams create a 1000 mm protective height, covering access to hazardous zones on machinery per IEC 61496. The operating range spans 0.3 m to 20.0 m, giving flexibility for both tight guarding and longer perimeter setups.
The 25 mm detection capability means the curtain catches a finger or hand reaching into the field — this is finger/hand protection class, not just presence detection. A 20 mm beam pitch with 50 beams gives a resolution that stops a hand from passing through undetected, which is the standard for guarding press brakes, robotic cells, and assembly stations. The 0.3 m minimum range allows mounting close to the hazard; the 20 m maximum covers long conveyor or gantry entries without needing multiple units. Rated IP65/IP67/IP67G means the housing and optics withstand washdown environments — IP67G adds oil resistance, so this unit is suitable for food-and-beverage lines or machining centers where coolant mist and cleaning chemicals are present. The -30°C to 55°C operating temperature covers cold storage and hot factory floors without derating.
Built-in blanking and muting
Blanking allows fixed objects (like a workpiece fixture) to break beams without triggering a stop, while muting temporarily suspends the curtain during a material pass-through, such as a pallet entering a conveyor zone. These features are integrated into the unit, so no external controller is needed for basic muting logic — reduces panel wiring and simplifies commissioning.