The F3SJ-A0370P55 is an Omron F3SJ-A series safety light curtain with a 55 mm detection capability. That 55 mm figure means it detects a person's leg or lower body entering the field — it is not finger- or hand-protection class. The 370 mm protective height and 8 beams at 50 mm pitch define the coverage zone: a 370 mm tall area where any obstruction of 55 mm or larger breaks the beam. Operating range spans 0.2 m to 9.0 m, so it works across a typical machine access opening or hazard zone up to 9 meters wide. Supply is 24 VDC standard for safety light curtains. Built-in blanking and muting functions give the integrator flexibility: blanking lets you disable specific beams to allow fixed tooling or workpiece protrusions through the field without triggering a stop; muting temporarily suspends the curtain during a defined material pass-through cycle, such as a pallet entering a guarded zone on a conveyor.
Because it is an active part, the procurement path is straightforward: submit an RFQ with your quantity and target delivery window. No cross-reference or substitute is required for this code — the original part is the right fit.
Where it goes in a line
This light curtain guards a hazard zone — typically the access opening to a machine cell, a robot work envelope, or a press area. The 370 mm protective height and 55 mm detection capability align with leg/body protection per IEC 61496, so it is sized for applications where an operator's lower body could reach into danger, not for finger or hand proximity. The 9.0 m operating range covers most single-side guarding spans. Mounting brackets and alignment aids are part of the F3SJ-A system; the IP65 enclosure handles washdown without additional shrouding. The 24 VDC supply integrates directly into standard safety relay or safety PLC input circuits.