That 20mm figure means it catches fingers reaching into the hazard zone — finger-protection class per IEC 61496-1 — so it suits guarding where operators reach past the curtain into a press, robot cell, or assembly station. The 1655mm protective height and 15mm beam pitch (110 beams total) define the guarded area: a 1.66-meter vertical zone with no gaps larger than 15mm between beams. Operating range spans 0.2m to 7.0m, giving flexibility for both tight machine guarding and wider access areas. The 24VDC supply is standard for safety circuits; blanking and muting functions are built in, so you can program fixed or floating blanking for workpiece pass-through and muting for conveyor-fed stations without an external controller.
Deployment context
Mounts via the standard F3SJ-A end brackets and column hardware — no special adapter needed for most machine frames. The 1655mm column length and 15mm beam pitch mean the emitter and receiver columns align to a 1.66-meter vertical zone; plan for gland-plate entry at the column base or top cap depending on cable routing.