When a person or object breaks that zone, it sends a stop signal to the machine control circuit. It is the primary sensor in a safeguarding system for hazard zones like press brakes, robot cells, and assembly stations. The F3SJ series is Omron's compact, modular safety light curtain line. The "B0225P25-01TS" suffix encodes the detection height, resolution, and connector type — verify the exact beam count and protected height against your guarding aperture before committing the BOM line.
That said, the evidence also carries an "eol_hot" lifecycle stage flag — a data inconsistency that may indicate a pending phase-out or a misclassification. Because the official productStatus is Active, treat the flag as unconfirmed. For a safety-critical line, it is prudent to confirm current availability with your distributor before freezing the BOM.
Signal integrity and installation
Safety light curtains are sensitive to electrical noise and optical interference. Mount the emitter and receiver on rigid brackets, aligned within the specified angle tolerance. Keep the cable runs away from VFD output lines and welding supplies — noise on the sync line can cause nuisance trips or, worse, a masked fault. Check the shield first: ground it at the controller end only. The Bulk package means this unit ships as a single curtain set (emitter + receiver) without a retail box. For panel integration, plan for the full cable length and connector clearance — the 01TS suffix indicates a specific connector style; confirm the mating cable part number separately.