Skip to main content
Omron F3SJ-B0785P25

Omron F3SJ-B0785P25 Light Curtain, 25mm Detection, 785mm Hei

MPN F3SJ-B0785P25
End of Life

Omron F3SJ-B Series safety light curtain, hand protection, 25mm detection capability, 785mm protective height, 38 beams at 20mm pitch, 0.2-7.0m operating range, IP65, 24VDC.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

F3SJ-B0785P25 specifications
ParameterValue
SeriesF3SJ-B
Supply voltage24 VDC
IP ratingIP65
Temp operating max55 °C
Temp operating min-10 °C
PackageBulk

Product details

The Omron F3SJ-B0785P25 is a Type 4 safety light curtain from the F3SJ-B series, rated for hand protection with a 25mm detection capability. That 25mm figure means it catches fingers reaching into the hazard zone — finger-protection class per IEC 61496-1 — so it is sized for access guarding around presses, assembly stations, and robotic cells where an operator's hands approach the danger point. The protective height is 785mm, covered by 38 beams spaced at a 20mm pitch. With a 0.2m to 7.0m operating range, this curtain suits medium-reach guarding where the transmitter and receiver sit a few metres apart — typical for a single-side access point on a machine cell.

Environmental fit and features

Rated IP65 — dust-tight and protected against water jets — so the sensor bodies and optics withstand washdown environments. That makes it viable for food-and-bev lines, packaging floors, or any area that sees regular hose-down cleaning. Built-in blanking and muting functions are available on this model. Blanking lets you mask fixed obstructions (like a conveyor frame passing through the field) without disabling the entire curtain. Muting allows the curtain to be temporarily overridden during a material pass cycle — a standard requirement for automated guided vehicle or pallet-transfer stations. Powered from a 24VDC supply, which is the standard control voltage for safety circuits in most panel designs.

MPN
F3SJ-B0785P25