Skip to main content
Omron G3PW-A220EU-C

Omron G3PW-A220EU-C Power Controller, 1~20A, 100-240VAC

MPN G3PW-A220EU-C
Active

Omron G3PW Series Power Controller, G3PW-A220EU-C, 1 ~ 20A input range, 100 ~ 240VAC supply, solid state output, chassis mount, spring terminal.

$587.82 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

G3PW-A220EU-C specifications
ParameterValue
SeriesG3PW
Output signalSolid State (2)
Display typeLED - Red Characters
Product typePower Controller
Supply voltage100 to 240VAC
MountingChassis Mount
Temp operating max55 °C
Temp operating min-15 °C
Weight2.3 lbs (1 kg)
PackageBox
Control methodOn/Off, Phase Control

Product details

The Omron G3PW-A220EU-C is a power controller from the G3PW series, designed to regulate current to resistive or inductive loads using on/off or phase-control methods. Its 120A input range and 100240VAC supply make it a fit for medium-current heating or lighting applications where a panel-mount SSR with integrated control logic is preferred over a separate controller and contactor stack.

The 120A input range defines the load current the internal solid-state switching element handles — not a sensor input. On a resistive heater bank pulling 15 A steady-state, this controller runs within its band; on a motor or transformer inrush, the phase-control method limits the initial current spike, but the continuous rating still governs. The 100240VAC supply is the control power for the logic and display, not the load voltage — confirm the load circuit is separately fed within the SSR's rated voltage (not listed here, so verify against the full datasheet).

Integration notes

Chassis-mount form factor with spring-terminal connections — no DIN-rail clip, so panel integration requires a flat surface and screw fixings. The LED display shows three red characters for local readout of current or setpoint, useful during commissioning without a separate HMI.

Deployment context

The event input feature allows an external dry-contact or PLC digital output to trigger a pre-programmed response — for example, holding a heater at a reduced power level during a production pause or forcing a controlled shutdown on a safety interlock. This makes the G3PW-A220EU-C suitable for industrial ovens, packaging line heat-seal stations, or plastic-welding fixtures where a simple supervisory signal needs to override the local setpoint without rewiring the control loop.

MPN
G3PW-A220EU-C