The Omron G3PW-A245EU-C is a G3PW-series power controller with dual solid-state outputs, rated for a 1 to 45 A input range and a 100 to 240 VAC supply. It uses on/off and phase control methods, displayed on a 3-character red LED. Chassis-mount with spring terminals — no DIN rail, so plan for direct panel or backplate fastening.
The 1 to 45 A input range covers resistive heating loads from fractional to moderate — think small ovens, hot-runner zones, or IR panels. Phase control lets you vary power smoothly rather than just bang-bang, which matters for process stability. The 100 to 240 VAC supply is line-powered directly; no separate control transformer needed in most panels. Dual solid-state outputs mean two independent load circuits in one package — useful for split-zone heaters or dual-element loads where you'd otherwise stack two SSRs. The spring terminals accept 0.2 to 2.5 mm² stranded or solid; strip to 8 mm and push in. No screw torque to verify, which speeds panel wiring. The 3-character red LED shows current or setpoint — enough for local readout, not a full HMI replacement.